|
 |
|
| |
Brake Tester technical Facts |
|
|
| Working motors |
2 x 4 Kw. |
| Maximum load per axle 4 tons. |
Maximum width rollers 2200 mm |
| Minimum width rollers |
780 mm. |
| Test speed |
6 km./h |
| Voltage |
220/380 V three phasic |
| Delayed |
start |
| Rollers diameter |
202 mm. |
| Rollers length |
730 mm. |
| Distance between shafts |
400 mm. |
| Roller friction coefficient |
0.9; 0.7 (WET) |
| Measurement |
0.6 KN |
| Suspension tester dimensions |
2320 x 680 x 250 mm. |
| Suspension tester net weight |
425 Kg |
|
|
|
 Welded steel coated rollers
Protectors for rollers
Strain gage measure system
Automatic start and stop
Data and charts filed on hard drive
The main function of the brake tester is to carry out a quick and effective check up of the working state of the brake systems. It accurately measures the brake force of the front and rear brake, hand brake , the difference between brakes of a same axle, the brake disk warp and their ovality .
It incorporates safety systems to detect the presence of the vehicle during the test, the detection of the slipping of wheels at the moment of measurement and independent motors to start the rollers. |
|
|
|
|
|
